Our Equipment
Axiovert 5 Microscope (Zeiss)
A smart microscopy system optimized for routine and advanced fluorescence imaging with fast and intuitive operation.
Fluorescence Channels:
- DAPI - Excitation ~365 nm | Emission ~445 nm (nuclear staining)
- FITC - Excitation ~470 nm | Emission ~525 nm (protein labeling)
- TRITC - Excitation ~550 nm | Emission ~605 nm (cytoskeleton and markers)
- Cy5 - Excitation ~640 nm | Emission ~690 nm (far-red imaging)
Imaging Capabilities:
- Brightfield and phase contrast imaging
- Multichannel fluorescence imaging
- One-click image acquisition (“Snap”)
- Standalone operation (no external PC required)
EVOS M5000 Microscope (Thermo Fisher Scientific)
A high-performance digital inverted microscope designed for fluorescence and phase contrast imaging of cells and biological samples.
Fluorescence Channels:
- DAPI - Excitation ~357 nm | Emission ~447 nm (nuclear staining)
- GFP - Excitation ~470 nm | Emission ~525 nm (protein labeling)
- Cy5 - Excitation ~650 nm | Emission ~670 nm (far-red fluorescence labeling)
Imaging Capabilities:
- Real-time image processing
- Z-stack acquisition (3D imaging)
- Multi-channel overlay for co-localization
- Immunofluorescence, live-cell studies, and multi-marker experiments
Gel Documentation System
A gel documentation system designed for visualization and imaging of nucleic acids and proteins in electrophoresis gels using UV and LED illumination.
Technical Specifications:
- Camera Resolution: 5 Megapixels
- UV Transillumination: 302 nm
- Light Sources: UV, White LED
- Sample Area: 20 × 26 cm
System Capabilities:
- Visualization of DNA and RNA bands in gels.
- Detection of fluorescent dyes (EtBr, SYBR Safe, GelRed, GelGreen, etc.)
- Protein gel imaging (Coomassie, silver stain, fluorescent dyes)
- Real-time gel observation during analysis
- PCR validation
Advanced Gel Documentation System
A high-sensitivity imaging system designed for chemiluminescence and gel documentation applications in molecular biology workflows.
Technical Specifications:
- Camera Resolution: 6 Megapixels Cooled CCD sensor
- Cooling: −30°C regulated (up to −60°C below ambient)
- Light Sources: UV, White LED
- UV transillumination: ~302 nm
- Sample Area: 20 x 26 cm
- Multi-tray support for different sample sizes
System Capabilities:
- DNA, RNA and protein gel imaging
- Chemiluminescence imaging (ECL) for Western blot detection with high sensitivity
- Detection of very weak signals using cooled camera and long exposure times
- Quantitative analysis (band intensity, molecular weight) via software
Freeze Dryer (Lyophilizer)
A vacuum freeze dryer designed for efficient removal of water from samples through sublimation, preserving structural integrity and biological activity.
Technical Specifications:
- Condenser Temperature: down to −60°C
- Vacuum Level: ≤ 10 Pa (high vacuum conditions)
- Tray Size: 200mm X4
System Capabilities:
- Gentle dehydration while maintaining protein structure and bioactivity
- Enables formation of porous structures for scaffold fabrication
- Supports stabilization and long-term storage of samples
- Used in Tissue engineering and Biomaterials research.
PCR ProFlex System
A high-performance thermal cycler designed for precise and flexible DNA amplification, supporting advanced PCR optimization and high-throughput workflows.
Technical Specifications:
- Temperature range: 0–100°C ±0.25°C
- Max ramp rate: up to 6.0°C/sec (block)
- Sample ramp rate: up to 4.4°C/sec
- Three Block formats
System Capabilities:
- High-precision DNA amplification with excellent temperature control
- Fast PCR cycling with high ramp rates for reduced experiment time
- Simultaneous running of multiple experiments with independent blocks
- User-friendly touchscreen interface for quick protocol setup
GENESYS™ 150 UV Spectrophotometer (Thermo Fisher)
A UV-Vis spectrophotometer designed for accurate concentration measurements and routine laboratory analysis.
Technical Specifications:
- Wavelength Range: ~190–1100 nm
- Spectral Bandwidth: ~2 nm
- Wavelength Accuracy: ±0.5 nm
- Photometric Range: up to ~3.5 Abs
System Capabilities:
- UV and visible absorbance measurements
- Quantitative concentration analysis (Beer-Lambert law)
- Kinetic measurements (time-based reactions)
- Multi-wavelength and spectrum scanning
- Touchscreen interface with standalone operation
Ideal for: Concentration measurements, enzyme kinetics, DNA/protein analysis, QA/QC experiments
NanoDrop™ One (ThermoFisher)
A compact, high-precision spectrophotometer designed for fast and accurate nucleic acid and protein quantification using microvolume samples.
Technical Specifications:
- Wavelength Range: ~190–850 nm
- Sample Volume: 1–2 µL
- Detection Range (dsDNA): ~2–27,500 ng/µL
- Measurement Time: ~3–5 seconds per sample
System Capabilities:
- Rapid measurements in seconds
- DNA, RNA, and protein quantitative analysis
- Cuvette-free measurement using direct pedestal
- Pre-configured methods for nucleic acids and proteins
- Touchscreen interface with standalone operation
- Sample purity evaluation
-86°C Freezer (Infrico Medcare ULT110)
An ultra-low temperature freezer designed for safe long-term storage of biological samples under stable and controlled conditions.
Technical Specifications:
- Temperature range: −80°C
- Capacity: 110–125 L
- Cooling system: Forced air cooling
- Insulation: High-efficiency thermal insulation
System Capabilities:
- Ultra-low temperature storage for sensitive biological materials
- Stable temperature control for long-term sample preservation
- Continuous monitoring with alarm system
Microplates readers – SPECTROstar, LUMIstar, FLUOstar Omega (BMG Labtech)
A versatile family of microplate readers designed for a wide range of life science applications, supporting absorbance, fluorescence, and luminescence measurements within a flexible platform.
Different models are optimized for specific applications: absorbance (SPECTROstar), luminescence (LUMIstar), or Fluorescent multi-mode detection (FLUOstar).
Technical Specifications:
- Detection modes: UV/Vis absorbance, fluorescence, and luminescence
- Wavelength range (absorbance): ~220–1000 nm
- Plate formats: 6 to 384 wells (model dependent)
- Detection system: CCD spectrometer and photomultiplier tube
- Measurement modes: endpoint, kinetic, spectral scanning
- Low-volume capability: down to ~2 µL (with dedicated plates)
System Capabilities:
- Absorbance measurements for concentration and enzymatic assays
- Full-spectrum absorbance acquisition in seconds without scanning
- High-sensitivity detection of low-abundance signals
- Kinetic measurements for real-time reaction monitoring
- Top and bottom reading for flexible assay design
- Pathlength correction for accurate quantification
Chemical Hood (Vista)
A chemical fume hood designed to protect laboratory users from hazardous vapors, fumes, aerosols, and chemical exposure during routine chemical handling and preparation.
Technical Specifications:
- Work surface: Chemical-resistant working area and panels
- Sash: Transparent front sash for user protection and visibility
- Ventilation: Exhaust airflow system for removal of hazardous vapors
- Lighting: Integrated work area lighting
System Capabilities:
- Protects users from inhaling toxic or irritating chemical vapors
- Removes fumes, aerosols, and volatile chemicals from the work area
- Supports safe preparation and handling of acids, solvents, stains, and reagents
- Provides a controlled workspace for routine chemical procedures
- Improves laboratory safety by reducing exposure to hazardous substances
Biological Safety Cabinet (Labconco)
A biological safety cabinet designed to provide a sterile and controlled environment for safe handling of biological samples, ensuring protection for the user, sample, and environment.
Technical Specifications:
- Cabinet type: Class II Type A2
- HEPA filtration: ≥99.97% efficiency at 0.3 µm
- Airflow control: Automatic airflow regulation based on filter load
- Control interface: Touchscreen panel with 2 integrated electrical sockets
System Capabilities:
- Ergonomic design for comfortable long-duration work
- Provides sterile conditions for biological and cell culture work
- “Night-Smart” mode for maintaining sterility at reduced airflow when not in use
- Smart operation system for programmable control of airflow and lighting.
Autoclave HICLAVE HVA-110 (Hirayama)
A high-capacity vertical autoclave designed for steam sterilization of laboratory materials, under controlled temperature and pressure conditions.
Technical Specifications:
- Chamber volume: 110 L
- Sterilization temperature range: 105–135°C
- Maximum pressure: ~0.26 MPa (38 psi)
- Sterilization timer: 1–250 minutes
- Chamber size: ~42 × 79.5 cm (diameter × height)
System Capabilities:
- Pre-programmed cycles for liquids and solids
- Agar sterilization and warming mode to prevent solidification after sterilization
- Forced cooling system for faster cycle completion and safe unloading
- High-capacity chambers suitable for large loads (glassware, media, waste)
- Real-time display of sterilization status and cycle progress
3D Printer Multi-tool (Prusa XL)
A high-precision 3D printer designed for advanced prototyping and multi-material fabrication.
Technical Specifications:
- Multi-tool head: up to 5 independent tool heads
- Nozzle diameter: 0.4 mm (standard, interchangeable)
- Build volume: 360 × 360 × 360 mm
- Layer height: ~0.05 – 0.30 mm
System Capabilities:
- Multi-material and multi-color printing with independent tool heads
- Creation of scaffolds for biomaterials and hydrogels
- Prototyping constructs and anatomical models for education and research
- Large-format printing for oversized models
- Rapid and iterative design workflows
Universal Testing Machine (Instron 3342)
A compact single-column universal testing system designed for mechanical testing of small samples and materials. It is Commonly used for tensile, compression, and friction testing in teaching, biomedical and materials laboratories.
Technical Specifications:
- Maximum force capacity: 500 N
- Load accuracy: ±0.5% of indicated load
- Data acquisition rate: up to 500 Hz
- Speed range: approx. 05–1000 mm/min
- Applications: Low-force mechanical testing of soft materials, polymers, films, textiles, biomaterials, medical devices, and educational samples
System Capabilities:
- Performs tensile testing to evaluate strength, elongation, and failure behavior
- Supports compression testing for scaffolds, soft materials, gels and small devices
- Allows mechanical characterization of biomaterials and tissue-engineering scaffolds
- Provides controlled test speed and repeatable loading conditions